Getting a dent in a vehicle or truck can occur anywhere and anytime. Even if you’re very careful on the road, scenarios like wrongly thrown footballs, runaway shopping, and out-of-nowhere light posts do happen and there’s nothing you can do about it. The only option you would have is to fix the dent by either taking your vehicle to a body shop or some mechanic from around your area. Or you can simply fix the dents yourself and save on garage fee, among other expenses as a consequence. There are a few ways you can go about getting a large dent out of your vehicle at home. Without further ado, here are a few proven methods on how to fix a large dent in a car door you may want to try.
Use a Toilet Plunger
A plunger is an effective way to fix dents that are large in size. At least this particular item doesn’t leave any creases in the middle of a dent. First find a clean toilet plunger that has a strong grip. Next, place the plunger on the area with the dent and pump it. This should create sufficient suction on the dent before you jump to the next step. Finally, pull the plunger out with some considerable force to ensure the dented area snaps back to its initial position like before.
Use a Rubber Mallet
A rubber mallet is a great tool for removing large dents from a car that can easily be accessed from behind. Just like the toilet plunger, this particular tool also doesn’t leave any marks behind after fixing the dents. However, it’s also very firm and strong which means one can easily reshape the dents if not careful. You should get real results if you use a rubber mallet that matches the actual size of the dings in your vehicle’s door.
This means finding a larger mallet could do the trick since you’re fixing a large dent. Any rubber mallet that doesn’t match the actual size of the dings would only create further marks on the door. Also, make sure to work the dents from the back and hit hard on the middle with sufficient force until all the dents pop out.
Use Screws, Hot Glue, and Wooden Dowels
Every time you’re about to fix a large dent on your vehicle’s door by yourself, there is the potential risk that you’d do your door more damage than you think. One of the safest and best ways to get out a large dent on a vehicle is by using a combination of screws, hot gun glue, and wooden dowels.
Simply place two nails into every side of the dowel and subsequently stick the glue underneath. Next, place the dowels glue-side down in sections around the ding. Make sure to repeat the process above several times until the whole area becomes covered in glue. Allow the parts to dry. Finally, pull all the wooden dowels out after the ding is gone.
Rinse and repeat this method in as many different places as you want till most of the dents fade away. On the other hand, it’s important to note that this method requires a lot of patience and sufficient glue for a person to see real results. And you should use either some rubbing alcohol or heat to detach the glue from the vehicle’s door nevertheless.
Use a Long Metal Rod and Knockdown
Every time you notice a ding on your vehicle, some tools like a metal rod and knockdown can save you big time. The purpose of these two is to work the dents inward while also ensuring that the surrounding edges of the ding rise upward. That means you’d be placing a long metal rod on the bottom and a knockdown on the top part of the dent every time. Eventually all the dents conspicuous on your car’s door would vanish into oblivion as a consequence.
Take advantage of a Specialty Tool
If any of the methods above is giving you a hard time, simply grab a dent removal kit with a variety of tools such as a suction cup dent remover or a Pops-a-Dent. A suction cup dent removal tool, in particular, works the same way as a plunger. All you have to do is fix it to the dent and then pull it upward to pop out the ding on your car’s door.
Whether old or new, nobody wants to drive a vehicle with a dent anywhere on its body parts. Dents sometimes vary from big dings to small dings based on the level of damage the vehicle had upon impact. Fortunately, you don’t need to bring your vehicle to a mechanic every time in order to fix the dents. This is a simple DIY task that anyone can do by themselves at home. Hopefully, this handy guide on how to fix a large dent in a car door has all the answers to your problems. Following the methods shared above will help you easily pop out dents in a few minutes without the risk of doing further damage to your vehicle’s door.